logo
Up to 5 files, each 10M size is supported. OK
JINAN HOWOSTAR AUTO PARTS CO.,LTD 86--15098764769 fionaloveschina@gmail.com
News Get a Quote
Home - News - HOWO Fuel Filters and Injection Parts: Diesel Quality Survival Guide for African and Middle East Truck Fleets

HOWO Fuel Filters and Injection Parts: Diesel Quality Survival Guide for African and Middle East Truck Fleets

November 17, 2026

 Most HOWO injection pump and injector failures in Africa and the Middle East are not manufacturing failures — they are filtration failures. When diesel arrives with visible water, high sulphur, or particulate that the transfer pump stirred up, a 10-micron filter element is the only barrier between that fuel and a set of plungers and nozzles machined to tolerances finer than a human hair. Change intervals of 30,000 km copied from European schedules are too long for Lagos, Mombasa, Dar es Salaam, Baghdad or Sana'a.

The four failure modes that start at the fuel tank

  • Water. Free water in the filter bowl reaches the plungers first; it flashes, scores the barrel, and the pump starts to idle-hunt and lose power.
  • Fine particulate. Abrasive dust below 10 microns passes a tired element and laps the nozzle needle seat — the classic white smoke plus hard-start combination.
  • Sulphur and acids. High-sulphur fuel with a low-TBN engine oil accelerates corrosion on injector bodies and pump internals.
  • Microbial growth. In humid coastal climates, bacteria at the fuel-water interface form a mat that blinds the pre-filter within weeks.

HOWO fuel and oil filter references, and where they fit

Element Reference numbers we stock Typical application Suggested interval, harsh fuel
Fuel filter element VG1540080012, VG1540080211, VG1540080311, VG1540080110 HOWO WD615 / WP10 fuel lines 10,000–15,000 km, or every drain of a rusty drum
Fuel filter element VG1092080052, VG1092080009 HOWO fuel filtration, MAN-style housing 10,000–15,000 km
Fuel filter, MC11 / MC13 WG9925550105 (FS20019), 201V12503-0061 HOWO T7H, C7H, MC11 and MC13 engines 15,000 km maximum, 10,000 km with visible water
Oil filter VG61000070005, VG1246070031, 200V05504-0122, JX0814 WD615.47 371 hp, D12.42, MC11 / MC13 Every 10,000 km at high dust load
Filter seat / housing VG000070005+001 WD615.47 371 hp EURO2, D10.38-40 Replace when the threads or seal face are scored
Injection pump assy VG1034080001 HOWO 380 hp in-line pump Only after a failed injector diagnosis

Diagnosis in ten minutes

  1. Drain a litre from the pre-filter into a glass jar and let it stand — a visible water line means the whole system is contaminated, not just the element.
  2. Cut the used element open. Black mud in the pleats means the element is undersized for the fuel; clean metal means the element was changed too early.
  3. Check for white or grey smoke at load with normal boost — that is nozzle spray pattern, not the pump.
  4. Do not reseal a leaking pump in the field. Contamination entering during a roadside reseal is a more expensive failure than the original leak.

Buy from a supplier who ships the whole kit

Jinan Howostar Auto Parts Co., Ltd has been supplying Sinotruk HOWO, Shacman and FUWA trailer parts from Jinan since 2010, with 50–100 staff and 80–90 % of turnover exported. A fuel-system order from an African or Middle Eastern fleet rarely stops at one filter: it travels with brake chambers, oil seals and cooling parts, so we consolidate filtration, injection, driveline and cooling items into one container and label every carton with the HOWOSTAR part number, cross-referenced to the original HOWO number in the packing list.

FAQ

Can I extend the interval with a premium filter? A better element buys tolerance, not immunity. In high-water diesel keep the 10,000–15,000 km interval and drain the water trap weekly.

Is FS20019 a direct replacement for WG9925550105? Yes — WG9925550105 is the HOWO reference, FS20019 the cross-reference used by many aftermarket suppliers. Quote both numbers when ordering.

Do injectors need coding after replacement? On mechanically governed WD615 pumps no; on electronically controlled MC11 / MC13 systems follow the OEM coding procedure.